Product details
BMW scanner 1.36
Features:
Working with BMW Scanner 1.3.6 (and 1.3.5) software from PA-Soft to read/clear error codes and
read/write certain memories of devices in the diagnostic chain
Some of the systems accessible with this device:
>> DME-Digital Motor Electronics E38/E39/E46/E53 up to 2004
>> EGS-Electronics gearbox control E38/E39/E46/E53 up to 2004
>> EWS-Electronics car immobilisation system E38/E39/E46/E53 up to2004
>> ABS-antilock-braking system with ASC/DSC E38/E39/E46/E53 up to 2004
>> EHC-electronic height control E38/E39/E46/E53 up to 2004
>> A/C-E38/E39/E46/E53 up to 2004
>> FGB-Rear compartment blower E38/E39/E46/E53 up to 2004
>> SRS-Supplemental restraint system E38/E39/E46/E53 up to 2004
>> IKE-instrument cluster electronics E38/E39/E46/E53 up to 2004
>> Mileage correction on e38/e39 93s56/66 chips mileage correction on e46 to sw15
>> LCM-Light check modules E38/E39/E46/E53 up to 2004
>> GR2-Cruise control E38/E39/E46/E53 up to 2004
>> PDC-Park distance control E38/E39/E46/E53 up to 2004
>> AIC-Automatic interval control E38/E39/E46/E53 up to 2004
>> RAD-Radio E38/E39/E46/E53 up to 2004
>> SZM-Switching centre, centre console E38/E39/E46/E53 up to 2004
>> NAV-Navigation system E38/E39/E46/E53 up to 2004
>> MID-Multi-info dispaly E38/E39/E46/E53 up to 2004
>> ZKE-Central body electronics E38/E39/E46/E53 up to 2004
>> SMB-Passenger seat memory E38/E39/E46/E53 up to 2004
>> LSM-Seat/steering wheel memory E38/E39/E46/E53 up to 2004
>> EDC-Electronic damper control E38/E39/E46/E53 up to 2004
>> LEW-Steering angle sensor E38/E39/E46/E53 up to 2004
>> RDC-Tyre pressure check E38/E39/E46/E53 up to 2004
>> MFL-Multi-function steering wheel E38/E39/E46/E53 up to 2004
>> DSP-Digital sound processor E38/E39/E46/E53 up to 2004
>> BMBT-On-board monitor, control panel E38/E39/E46/E53 up to 2004
>> VID-Video Mdule E38/E39/E46/E53 up to 2004
>> SES-Language input system E38/E39/E46/E53 up to 2004
>> Tel-car telephone E38/E39/E46/E53 up to 2004
>> HKM-Boot lid module E38/E39/E46/E53 up to 2004
>> LRA-Automatic headlight vertical aim control E38/E39/E46/E53 up to 2004
>> FID-Multi info display rear E38/E39/E46/E53 up to 2004
>> NAJ-Japanese navigation system E38/E39/E46/E53 up to 2004
The program reads out the identification data of the found modules, defines quantity of mistakes, dumps them, and then repeats reading.
The status of each module is deduced in two columns where in the first the quantity of mistakes kept in memory of the module while in service is shown, and in the second - quantity of mistakes after dump, i.e. a real condition of the module at present.
Thus the program does not decipher codes of the found mistakes, and only defines their quantity. It is necessary to pay attention to it, as it excludes its use as diagnostic software. On the other hand, such programs are optimum from the point of view of pre-selling preparation of the car.
As the greatest interest is represented with such electronic modules as IKE, LCM, EWS, DME and EGS, and opportunities of the program are defined on these modules; it is meaningful to consider the list of accessible functions in more detail, on concrete examples.
- FACTORY DEFAULTS - dump on factory installations
- SERVICE RESET - dump of service intervals
- COPY CODING - copying coding dates of the automobile from IKE in EWS
•READ KEY - data reading from a key
Package including:
- BMW Scanner Interface
- OBD2 connection cable
- BMW connection cable
- RS232 extension cable
|
