| MODELS |
C0632A×750 |
C0632A×1000 |
C0636A×750 |
C0636A×1000 |
| Swing over bed |
330mm(13) |
360mm(14) |
| Swing over cross slide |
198mm(7-25/32) |
212mm(8-1/6) |
| Swing in gap diameter |
476mm(18-3/4) |
491mm(9-1/3) |
| Swing in length |
210mm(8-1/4) |
210mm(8-1/4) |
| Center height |
166mm(6-1/2) |
166mm(6-1/2) |
| Admits between |
750mm(30) |
1000mm(40) |
750mm(30) |
1000mm(40) |
| Bed width |
187mm(7-3/8) |
187mm(7-3/8) |
| Bed length |
1248mm(49-1/8) |
1655mm(65-1/8) |
1363mm(53-2/3) |
1655mm(65-1/8) |
| Spindle bore |
38mm(1-1/2) |
38mm(1-1/2) |
| Spindle nose |
D1-4 or A2-4 |
D1-4 or A2-4 |
| Taper in nose |
NO.5 morse |
NO.5 morse |
| Taper in sleeve |
NO.3 morse |
NO.3 morse |
| Speeds number |
8 or 16(pole changeable motor) (optional) |
8 or 16(pole changeable motor) (optional) |
| Speeds range |
70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor) |
70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor) |
| Cross slide travel |
160mm(6-5/16) |
118mm(4-5/16) |
| Compound rest travel |
68mm(2-11/16) |
68mm(2-11/16) |
| Lead screw thread |
8T.P.I. or 3mm pitch |
8T.P.I. or 3mm pitch |
| Feed rod diameter |
19mm(3/4) |
19mm(3/4) |
| Cutting tool max section |
16mm×16mm(5/8×5/8) |
16mm×16mm(5/8×5/8) |
| Threads imperial pitches |
36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I) |
36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I) |
| Threads metric pitches |
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) |
28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) |
| Threads diametral pitches |
36 Nos.8-112 D.P |
36 Nos.8-112 D.P |
| Threads module pitches |
22 Nos.0.2-3 M.P. |
22 Nos.0.2-3 M.P. |
| Longitudinal feeds imperial |
36 Nos.0.0019-0.0273/Rev.or
(32 Nos.0.002-0.548/Rev) |
36 Nos.0.0019-0.0273/Rev.or
(32 Nos.0.002-0.548/Rev) |
| Longitudinal feeds metric |
36 Nos.0.050-0.696/Rev.or
(32 Nos.0.052-0.392mm/Rev) |
36 Nos.0.050-0.696/Rev.or
(32 Nos.0.052-0.392mm/Rev) |
| Cross feeds imperial |
36 Nos.0.0006-0.0094/Rev.or
(32 Nos.0.007-0.0187/Rev) |
36 Nos.0.0006-0.0094/Rev.or
(32 Nos.0.007-0.0187/Rev) |
| Cross feeds metric |
36 Nos.0.013-0.188/Rev.or
(32 Nos.0.014-0.380mm/Rev) |
36 Nos.0.013-0.188/Rev.or
(32 Nos.0.014-0.380mm/Rev) |
| Quill diameter |
32mm(1-1/4)(NO.3M.T.) |
32mm(1-1/4)(NO.3M.T.) |
| or (optional) |
| Quill travel |
100mm(3-15/16)(NO.3M.T.) |
100mm(3-15/16)(NO.3M.T.) |
| or (optional) |
| Quill taper |
NO.3 morse |
NO.3 morse |
| For main motor |
1.5KW 3PH or 1PH |
1.5KW 3PH or 1PH |
