MyRS |
  
BTD Company
 
  Product Categories

spray booth(0)
pre-room(0)
Mixing room(0)
Preparation-Painting - Drying production line(0)
Infrared Painting Lamp(0)


  Products
 

 
 
7M Preparation-Painting and Drying Production Line (BTD-1B)
Certificate
0
Commend
0
 
 

 

Specification

7M Preparation-Painting and Drying  production line of specification :

1.Booth Dimensions  
- Internal Size(L*B*H)  Preparation :7000*4000*2800mm
Painting booth:7000*4000*2800mm
Drying booth :7000*4000*2800mm
- External Size(L*B*H)  7120*15500*3460mm
2.Foundation and Floor    
- Loading Capacity  of Galvanized Grating 650KG/ wheel,
- Surface Area 27M*2 Full  Galvanized Grating gills*3unit
- Metal Basement 800mm Height should be need to dig
foundation
- Drive-in Ramps NO
Wall and Door    
- Steel Wall and Roof Panel Double Construction with Insulations EPS 60mm
- Thickness with Insulations EPS 50mm
5-Folded Entrance Door With Safety Glass Window 3200*2700 mm (B*H) -2unit
-Operators Door With Safety ,Glass Window 800*2000  mm (B*H)   2PCS
Lighting  
- Side Lightings Preparation     24 Units, each 4*58W,  Total 1392W
Painting booth  32 Units, each 4*(58W,  Total 1856W
Drying booth    4 Units,  each 2*58W,  Total 464w
- Brightness
Preparation     >800 Lux,  IP54 Grade
Painting booth  >1000 Lux, IP54 Grade
Drying booth    >300 Lux,  IP54 Grade
3.Filtration  
- Prefilters Fiberglass,Paint-Stop-Filters Plate type duel filters
- Ceiling Filters EU5 Fine Filters, 6 Units
- Floor Filters Fiberglass, Paint-Stop-Filters
Ventilation System 1 Unit  Preparation    
- Direct Drive Motor (Fresh Air)
 1*5.5KW,970RPM,380V,50HZ  motor certificationCE
- Direct Drive Motor (Exhaust Air) NO
- Fan Capacity  18000m*3/h  
- Air Flow Speed  +/- 0.15m/s  
4.Ventilation System 1Unti Painting booth  
-Direct Drive Motor (Fresh Air)2*7.5KW,970RPM,380V,50HZ  motor certificationCE
- Direct Drive Motor (Exhaust Air) 2*7.5KW,970RPM,380V,50HZ Domestic motor certificationCE
- Fan Capacity   25000m*3/h  
- Air Flow Speed   +/- 0.28m/s in an empty booth
Ventilation System 1 Unit Drying booth    
- Direct Drive Motor (Fresh Air):1*7.5KW,970RPM,380V,50HZ  motor certificationCE
- Direct Drive Motor (Exhaust Air)  NO
- Fan Capacity   25000m*3/h  
- Air Flow Speed   +/- 0.28m/s in an empty booth
6.Heating System : 1Unit  Painting booth    
- Heating Exchanger Stainless Steel 1Gr18Ni9Ti  
-Heating Exchange Capacity  2*200KW(260.000cal/H) RIELLO
- Max. Drying Temperature   80 degree
- Heating time:3-5 min (from 20 to 60 degree) by Drying Phase  
7.Heating System:1Unit Drying booth    
- Heating Exchanger: Stainless Steel 1Gr18Ni9Ti  
-Heating Exchange Capacity  2*200KW(260.000cal/H) RIELLO
- Max. Drying Temperature   80 degree
- Heating time:3-5 min (from 20 to 60 degree) by Drying Phase  
- Heating Type :Diesel  
8.Control Board    
-Control system: Stander control Delta Depressurization start system  EN60204-1-2006
- Function:Spraying ,baking, warming spray paint, emergency
stop switch
-PLC :yes
-Import element  master device import element
- Overpressure Manometer :yes
- Alarm equipment :yes



  Related to product
 
BTD Company
Address:Guangzhou ,China
Visitors:
Tel:866638363111


Leon Online Corporation
©2007-2024 RecycleSources All Rights Reserved.
No data at present