Solar Charge Controller WS-C2412
The charge current range of WS-C2412 (WELLSEE solar energy controller) series charge controllers is from 1A to 50A, which could meet the requirements of most solar electricity generating system. MCU (Micro-Processing Controller) has PMW (Pulse Modulation Wide-frequency) 0~100% variable duty cycle process. Depending on the types and actual charging situation of the battery, WS-C controller series can provide the fast and best charging voltage and electricity from the PV panel.
Functions:
1. Applying with various types of batteries
2. Automatic recognition of input voltage
3. Micro processing controller Pulse Modulation Wide-frequency(PWM)charge
4. Temperature sensor for charging a battery in compensation
5. Overloading protection (automatic comeback)
6. Overcharge protection
7. The temperature compensate
8. Short circuit protection (automatic comeback)
9. Thunder protection
10. Reversed discharge protection
11. Conversed polarity connection protection (automatic comeback)
12. Low voltage protection
TECHNICAL INDEX:
Model
|
WS-C2412 6A
|
WS-C2412 10A
|
WS-C2412 12A
|
Rated Voltage
|
12V/24V Automatic distinguish voltage
|
Loading current Max
|
6A
|
10A
|
12A
|
Full charge cut
|
13.7V/27.4V
|
Low voltage cut
|
10.5~11V/21V~22V
|
Temperature compensation
|
-3mv/℃/cell
|
No load loss
|
≤20mA
|
Wire area Min
|
2.5mm2
|
Voltage drop
|
<140mv
|
<200mv
|
<210mv
|
Take the product manual as to allow until further notice
|