This strip builder is used by companies who build medium to large size rollers. It is most often used for building rollers used in the steel, paper and plywood industries. The machine consists of a rubber extruder and an operator-friendly applicator system mounted on a traveling platform. This platform moves along the length of the spinning roller applying rubber on the ends ( Z-axis ) as well as the face ( X-axis ) of the roller. These systems are designed with a stationary spin station.
Specification
Model
PHT - 1270
Max & min roll diameter
1270 / 25 mm
( Depend on spin station and option for the extruder )
Cover thickness range
10 mm per pass
Diameter of screw
Φ 75 mm
L/D ratio of screw & speed
12:1 / max. 40 RPM
Feed roller reducer motor
DC 1 HP
Full auto temp. & cooling control system
3 positions / 2 positions
Cooling motor
AC 1 HP x 2 units
Air pressure
2 HP max. 5.0 kgf / cm
Gear box motor
DC 40 HP
Operating roller centerline height
140 cm
Traveling platform wheel size diameter
Φ 125 mm x W 55 mm
Track size
W 50 mm
( Floor track, cableway & cabling option for the extruder )